Mobile separation and filtration system with the latest degree of cleaning Cyclone Dust Collector – Miha-Vac MDS-Q3-Mobile
The Miha-Vac MDS Q3 industrial mobile dust collection system is designed for filtering dust particles by gravity separation in a cyclone separator and subsequent filtration by a fine polyester filter. This process allows the separation of 99.9% of the suction dust in the separator and filtration from 1 to 5 microns, class F8M8.
The system consists of a centrifugal fan with a remote motor 2.2 KW, speed 2890 rpm. This and the design of the impeller give a flow rate of 1500 cubic meters per hour and a static pressure of 1900 Pa. The suction of the dust particles is carried out through a pipeline with a diameter Ф 100 mm.
Entering the cyclone separator, particles up to 10 microns are separated in a container with a volume of 40 liters. The remaining fine powder below 10 microns is collected by a cartridge polyester filter, collecting it in a container with a volume of 15 liters.
The frame is made of tubular profile 40x40x2 and 60x30x2, equipped with four locking, wear-resistant wheels. This allows full rotation and easy movement. The high load capacity of the frame allows safe
movement and correct positioning of the operating system.
* The system is designed for:
Cleaning of industrial and residential buildings.
Suction and collection of polished concrete particles.
Cleaning fireplaces and stoves.
Aspiration from carpentry machines.
Suction of shavings and metal dust from metalworking machines.
Transport, dust collection, collection of dry mixtures and materials.
*Technical specification:
Dimensions of MDS Q3
Length 100 cm; Height 170 cm; Width 53 cm.
Electric motor – single-phase or three-phase 220/380 V; 2.2 kW; 9.2 A; 2890 rpm
Flow rate up to 1500 cubic meters per hour
Static imposition up to 1900 Pa
Metal impeller fin with backward curved blades to transfer fine dust.
Inlet diameter ф100
Primary container 40 liters
Secondary container 15 liters
Fine polyester filter with a filtration degree of 1 to 5 microns class F8M8.
Robust and movable frame
The construction is completely electrostatically polymer powder coated
Warranty up to 18 months.